View H11G3W_249085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION
The H11GX series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor which has an integral base-emitter resistor to optimize elevated temperature characteristics.
H11G1 H11G2 H11G3
FEATURES
* High BVCEO - Minimum 100 V for H11G1 - Minimum 80 V for H11G2 - Minimum 55 V for H11G3 * High sensitivity to low input current Minimum 500 percent CTR at IF = 1 mA * Low leakage current at elevated temperature (maximum 100 A at 80C) * Underwriters Laboratory (UL) recognized File# E90700
APPLICATIONS
* * * * * CMOS logic interface Telephone ring detector Low input TTL interface Power supply isolation Replace pulse transformer
ANODE 1 6 BASE
CATHODE 2
5 COLLECTOR
N/C 3
4 EMITTER
NOTE All dimensions are in inches (millimeters)
ABSOLUTE MAXIMUM RATINGS
Parameter TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Total Device Power Dissipation @ TA = 25C Derate above 25C Input-Output Isolation Voltage EMITTER Forward Input Current Reverse Input Voltage Forward Current - Peak (1s pulse, 300pps) LED Power Dissipation @ TA = 25C Derate above 25C DETECTOR Collector-Emitter Voltage H11G1 H11G2 H11G3 Detector Power Dissipation @ TA = 25C Derate above 25C Symbol TSTG TOPR TSOL PD VISO IF VR IF(pk) PD Value -55 to +150 -55 to +100 260 for 10 sec 260 3.5 5300 60 6.0 3.0 100 1.8 Units C C C mW mW/C Vac(rms) mA V A mW mW/C
VCEO
PD
100 80 55 200 2.67
V
mW mW/C
7/21/00
200045A
HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
H11G1, H11G2, H11G3
ELECTRICAL CHARACTERISTICS
(TA = 25C Unless otherwise specified.)
INDIVIDUAL COMPONENT CHARACTERISTICS
Characteristic EMITTER Forward Voltage Forward Voltage Temp. Coefficient Reverse Breakdown Voltage Junction Capacitance Reverse Leakage Current DETECTOR Breakdown Voltage Collector to Emitter Collector to Base Emitter to Base (VCE = 80 V, IF = 0) Leakage Current Collector to Emitter (VCE = 60 V, IF = 0) (VCE = 30 V, IF = 0) (VCE = 80 V, IF = 0, TA = 80C) (VCE = 60 V, IF = 0, TA = 80C) ICEO (IC = 100 A) (IC = 1.0 mA, IF = 0) BVCEO (IR = 10 A) (VF = 0 V, f = 1 MHz) (VF = 1 V, f = 1 MHz) (VR = 3.0 V) Test Conditions (IF = 10 mA) Symbol VF VF TA BVR CJ IR Device ALL ALL ALL ALL ALL ALL H11G1 H11G2 H11G3 H11G1 BVCBO BVEBO H11G2 H11G3 ALL H11G1 H11G2 H11G3 H11G1 H11G2 100 A 100 nA 100 80 55 100 80 55 7 10 V 3.0 Min Typ** 1.3 -1.8 25 50 65 0.001 10 Max 1.50 Unit V mV/C V pF pF A
TRANSFER CHARACTERISTICS
DC Characteristic EMITTER Current Transfer Ratio Collector to Emitter (IF = 1 mA, VCE = 5 V) (IF = 16 mA, IC = 50 mA) Saturation Voltage (IF = 1 mA, IC = 1 mA) (IF = 20 mA, IC = 50 mA) (IF = 10 mA, VCE = 1 V) CTR H11G1/2 H11G3 H11G1/2 VCE (SAT) H11G1/2 H11G3 5 (500) 2 (200) 0.85 0.75 0.85 1.0 1.0 1.2 V H11G1/2 100 (1000) mA (%) Test Conditions Symbol Device Min Typ** Max Unit
TRANSFER CHARACTERISTICS
Characteristic SWITCHING TIMES Turn-on Time Turn-off Time Test Conditions (RL = 100 , IF = 10 mA) 30 Hz) Symbol ton toff Device ALL ALL Min Typ** 5 100 Max Unit s
(VCE = 5 V) Pulse Width
300 s, f
** All typical values at TA = 25C
7/21/00
200045A
HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
H11G1, H11G2, H11G3
Fig. 1 Output Current vs. Input Current
10 100
Fig. 2 Normalized Output Current vs. Temperature
IC - NORMALIZED OUTPUT CURRENT
IC - NORMALIZED OUTPUT CURRENT
1 Normalized to: VCE = 5 V IF = 1 mA
10
IF = 50 mA IF = 5 mA IF = 1 mA IF = 0.5 mA
Normalized to: VCE = 5 V IF = 1 mA TA = 25C
0.1
1
0.01
0.1
0.001 0.1
1
10
0.01 -60
-40
-20
0
20
40
60
80
100
120
IF - LED INPUT CURRENT(mA)
TA - AMBIENT TEMPERATURE (C)
Fig. 3 Output Current vs. Collector - Emitter Voltage
100 1000 Normalized to: VCE = 5 V IF = 1 mA TA = 25C
Fig. 4 Collector-Emitter Dark Current vs. Ambient Temperature
IC - NORMALIZED OUTPUT CURRENT
ICEO - DARK CURRENT (nA)
IF = 50 mA IF = 10 mA IF = 2 mA
100
VCE = 80V
10
10
VCE = 30V
1
IF = 1 mA IF = 0.5 mA
VCE = 10V 1
0.1
0.1
0.01 1 10
0.01 0 10 20 30 40 50 60 70 80 90 100
VCE - COLLECTOR - EMITTER VOLTAGE (V)
TA - AMBIENT TEMPERATURE (C)
Fig. 5 Input Current vs. Total Switching Speed (Typical Values)
10
IF - FORWARD CURRENT (mA)
RL = 10
RL = 100
RL = 1k
1
Normalized to: VCC = 5 V IF = 10 mA RL = 100 0.1 0.1 1 10
ton + toff - TOTAL SWITCHING SPEED (NORMALIZED)
7/21/00
200045A
HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
H11G1, H11G2, H11G3
Package Dimensions (Through Hole)
3 2 1
PIN 1 ID.
Package Dimensions (Surface Mount)
0.350 (8.89) 0.330 (8.38)
3
0.270 (6.86) 0.240 (6.10)
2
1
PIN 1 ID.
0.270 (6.86) 0.240 (6.10)
4
SEATING PLANE
5
0.350 (8.89) 0.330 (8.38)
6
4 5 6
0.070 (1.78) 0.045 (1.14)
0.070 (1.78) 0.045 (1.14)
0.300 (7.62) TYP
0.200 (5.08) 0.135 (3.43)
0.200 (5.08) 0.165 (4.18)
0.020 (0.51) MIN 0.016 (0.40) 0.008 (0.20)
0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.100 (2.54) TYP
0.154 (3.90) 0.100 (2.54)
0.022 (0.56) 0.016 (0.41)
0.300 (7.62) TYP
0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP
0 to 15
Lead Coplanarity : 0.004 (0.10) MAX
Package Dimensions (0.4"Lead Spacing)
3 2 1
PIN 1 ID.
Recommended Pad Layout for Surface Mount Leadform
0.270 (6.86) 0.240 (6.10)
0.070 (1.78)
4
5
6
0.060 (1.52)
0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14)
0.415 (10.54)
0.100 (2.54) 0.030 (0.76)
SEATING PLANE
0.295 (7.49)
0.004 (0.10) MIN
0.200 (5.08) 0.135 (3.43)
0.154 (3.90) 0.100 (2.54)
0.016 (0.40) 0.008 (0.20)
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP
0 to 15 0.400 (10.16) TYP
NOTE All dimensions are in inches (millimeters)
7/21/00
200045A
HIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
H11G1, H11G2, H11G3
ORDERING INFORMATION
Option
S SD W 300 300W 3S 3SD
Order Entry Identifier
.S .SD .W .300 .300W .3S .3SD
Description
Surface Mount Lead Bend Surface Mount; Tape and reel 0.4" Lead Spacing VDE 0884 VDE 0884, 0.4" Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape & Reel
QT Carrier Tape Specifications ("D" Taping Orientation)
12.0 0.1 4.85 0.20 4.0 0.1 0.30 0.05 4.0 0.1 O1.55 0.05 1.75 0.10
7.5 0.1 13.2 0.2 16.0 0.3 9.55 0.20
0.1 MAX
10.30 0.20
O1.6 0.1
User Direction of Feed
NOTE All dimensions are in millimeters
7/21/00
200045A
MARKING INFORMATION
1
H11G1 V XX YY K
3 4 5
2 6
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) Two digit year code, e.g., `03' Two digit work week ranging from `01' to `53' Assembly package code
Reflow Profile (Black Package, No Suffix)
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 225 C peak
215C, 10-30 s
Time above 183C, 60-150 sec
Ramp up = 3C/sec 3.5 4 4.5
* Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended
Time (Minute)
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM FAST ActiveArrayTM FASTrTM BottomlessTM FPSTM CoolFETTM FRFETTM CROSSVOLTTM GlobalOptoisolatorTM DOMETM GTOTM EcoSPARKTM HiSeCTM E2CMOSTM I2CTM EnSignaTM i-LoTM FACTTM ImpliedDisconnectTM FACT Quiet SeriesTM
ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC Across the board. Around the world.TM OPTOPLANARTM PACMANTM The Power Franchise POPTM Programmable Active DroopTM
Power247TM PowerEdgeTM PowerSaverTM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER SMART STARTTM SPMTM
StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET VCXTM
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I13

▲Up To Search▲

Price & Availability of H11G3W

	To Download H11G3W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .